Safe and reliable：This cam uses high thermal conductivity silica gel inside, and is sealed with an aluminum alloy shell to achieve a stronger heat dissipation effect.
All-weather: This cam has been sealed inside, so its waterproof and dustproof performance is very good, the protection level is up to IP67 and you can use it in all kinds of rain, snow and harsh environments. It can be used normally even if it is immersed in fresh water about 30 minutes.
|Image Sensor||1/3" CMOS Sensor|
|IMAGE||16:9 or 4:3|
|TV System||NTSC or PAL|
|Electronic Shutter||PAL:1/50~100,000; NTSC: 1/6~100,000|
|S/N Ratio||>52dB(AGC OFF)|
|Dimensions||19mm x 19mm|
|Wide Power Input||5-25V|
① Seawater is highly corrosive, please clean with fresh water and dry immediately once d rone touched seawater.
② Please supply power strictly according to the official voltage range, otherwise it may be burnt.
③ When the CAM is working, the surface will generate high temperature, please do not touch it directly to avoid burns.
④ Please pay attention to prevent static electricity during use.
- 1 x HULK CAM
- 1 x Spare Cable
- 8 x Screws
- 1 x Sticker