DarwinFPV CineApe20 Compatible with Pavo20 2-inch Whoop FPV Drone

DarwinFPV CineApe20 is a 2-inch whoop fpv drone designed for small drone enthusiasts. It is compact and portable, weighing less than 100g, and complies with drone regulations in all countries. It can perform perfectly well in both indoor narrow spaces and outdoor open areas.

From the very beginning of its design, we have fully considered the operation experience of beginners. The whole drone is modularly designed, and all components are plug-and-play, getting rid of the trouble of welding. The body adopts carbon fiber and high-strength PC protective guard, and it remains safe even when hitting the wall at full throttle. For beginners, it is the most worry-free choice to step into the FPV field. 

The CineApe20 O3 version inherits all the advantages of Pavo20.  It has the same excellent flight performance as the original frame, except that the frame is replaced with TPU material, and GPS is additionally added, which is more in line with the needs of players, 
and always adheres to the principle of high cost performance of DarwinFPV.

CineApe20 is currently the cheapest 2-inch whoop fpv drone on the market.  It is highly safe, durable, and integrates movie shooting, freestyle, leisure, and safety.  It is very suitable for FPV beginners to practice with. If you are still struggling and don't know which fpv drone to order , CineApe20 may be a suitable choice for you!

Features

1：CineApe20 is plam-sized, very convenient to carry. It is suitable for both indoor stable shooting and outdoor dynamic flying. It is an ideal choice for beginners to enter FPV；
2：Differenrt frome Pavo20, CineApe20 adopts TPU material, which can filter low-frequency vibrations without shock-absorbing balls and stay away from rolling shutter. The plate reserves two sets of adjustment mount holes in the front and back. When installed in the front holes, the protective guard cannot be seen even in the O3 ultra-wide-angle mode. In addition, TPU is softer and durable, which can better protect O3 from damage caused by crashes；
3：The body adopts an integrated and closed design with smooth body lines for smoother flight. At the same time, it reduces the risk of damage caused by the entry of debris and is more durable；
4：The whole series is equipped with GPS, and the front GPS can better stay away from antenna interference. In case of emergency rescue, it is better to be safe than sorry！
5：The brand-new Bling series 1103 motor, we have specially reduced the stiffness of the motor shaft and is more resistant to crashes. It supports 2-3S batteries, and can achieve 5.5 minutes of flight time and a thrust-to-weight ratio of 6:1, achieving a perfect balance between endurance and performance；
6：The whole drone adopts a modular full plug-and-pull design, and the camera,vtx, and motors are plug-and-play. It is convenient for maintenance and replacement of components, and more easier for beginners to get started；
7：The top plate reserves two kinds of mount holes, 20×20 and 25.5×25.5, which can install analog vtx, O3, RunCam Link, Walksnail, OpenIPC, and all vtxs such as the not-yet-released DJI O4.

Packing List 

1 x CineApe20  FPV Drone 
1 x 120*120mm Logo Sticker
1 x Accessories Pack
1 x Spare Screws Pack 
1 x Manual Card