Help Center

1. Check the battery is fully charged.

2. Make sure the battery is plugged into the drone correcty.

3.Check for crash damage, moisture, corrosion, or burnt electronic.

1. Inspect the USB Cable and determine if it is a Data Cable and NOT a Charging Cable
2. Disconnect any USB extension Cables and make sure the Drone is connected directly to the computer
3. Check to make sure the correct Betaflight Version is installed on your computer
4. Make sure the correct drivers are installed for your computer to detect the Drone

1. Check if the propellers are installed correctly
2. Check the battery is fully charged and plugged in correctly
3. Make sure radio controller is turned on and connected to the drone

1. Make sure the battery is fully charged and connected
2. Check if your radio controller is on and correctly bound to the Drone’s Receiver
3. Make sure your receiver and radio controller are both on the same protocol
4. Inspect all switches and gimbals to be in their default position before powering up the drone

1. Check antennas for any damage
2. Adjust antenna position for maximum range
3. Check your distance. If drone passes range limit, the drone will failsafe
4. Check surrounding enviroment for any wireless transmission or RF noise. Wi-Fi Routers, Cellphone Towers, running Car Engines, other Drones, and more may impede wireless performance
5. Check surrounding enviroment for physical objects in between you and your drone. Trees, buildings, cars, hills, and more may impede wireless performance